The phosphorus (P)-saturated aluminium sludge used as substrate in constructed wetland (CW) for P-rich wastewater treatment was investigated to recover P and Al through chemical precipitations of the P-extraction leachate ...
Background, aim and scope: Treatment performance of constructed wetlands (CWs) is largely dependent on the characteristics of the wastewater. Although livestock wastewater is readily biodegradable in general, its variety ...
The objective of this study was to assess the suitability of statistical and the k-C* models to projecting treatment performance of constructed wetlands by applying the models to predict the final effluent concentrations ...
The objective of this study was to investigate the application of advanced oxidation processes (AOPs) to the treatment of wastewaters contaminated with hydrocarbon oil. Three different oil-contaminated wastewaters were ...
The objective of this study was to investigate the application of advanced oxidation processes (AOPs) to the treatment of wastewaters contaminated with hydrocarbon oil. Three different oil-contaminated wastewaters were ...
A process-based model that can evaluate the transport and the fate of phosphorus (P) in agricultural wastewater was developed for a novel 4-stage dewatered alum sludge cakes (DASC) based constructed wetlands (CWs) system ...
Based on the fuzzy logic principle, a modified Fuzzy Synthetic Evaluation (FSE) is proposed to assess water quality status of Weihe River (Baoji, China). The potential application of the FSE has been tested in a case study. ...
Step-feeding strategies have been extensively studied and comprehensively analyzed in this study for a four-stage alum sludge-based tidal flow constructed wetlands (AlS-TFCWs) system. Enhanced total nitrogen removal of 83% ...
Bridge codes adopt values for dynamic allowance in traffic load models that are necessarily conservative
to cover for an entire range of bridges with different mechanical characteristics, boundary conditions, and the ...
Structures include elements designated as load bearing and non-load bearing. While non-load bearing elements, such as facades and internal partitions, are acknowledged to add mass to the system, the structural stiffness ...