RSS
- You are here:
- Research Repository UCD
- >
- College of Engineering & Architecture
- >
- Search
JavaScript is disabled for your browser. Some features of this site may not work without it.
Search
Search Results for Collection: College of Engineering & Architecture
-
(ASCE, 2009-02)It is well accepted that the quality of soft clay samples obtained using standard fixed piston samplers can be relatively poor and that block samples are necessary to yield very high quality samples. However for many ...
-
(Taylor & Francis, 2009-11)As a part of attempt for phosphorus (P) recovery from P-saturated alum sludge, which was used as a low-cost P-adsorbent in treatment reed bed for wastewater treatment, decolouration of H2SO4 leachate obtained from previous ...
-
(Elsevier, 2009-10)Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed ...
-
(ASTM, 2009-06)Waterworks sludge continues to be an inescapable by-product of the potable water treatment process. Accordingly, final disposal of the sludge remains one of the most significant pressing problems for the potable water ...
-
(Elsevier, 2009-07)The aim of this study is to obtain optimal decolourization conditions for Acid blue-7 (AB7) wastewater treatment by Ti/TiO2 photoelectrocatalysis using response surface methodology (RSM). On the basis of a three-variable ...
-
(Elsevier, 2009-01)This study aims to explore a novel application of dewatered alum sludge cakes (DASC) as the main medium in a single model reed bed to treat phosphorus-rich animal farm wastewater under "tidal flow" operation on a long term ...
-
(IWA Publishing, 2009-12)In view of the well recognized need of reject water treatment in MWWTP (municipal wastewater treatment plant), this paper outlines two strategies for P removal from reject water using alum sludge, which is produced as ...
-
(IWA Publishing, 2009-07)This research has two eventual goals: (1) To optimize performance of subsurface constructed wetlands for removal of phosphorus (P) (2) To demonstrate that dewatered alum sludge (a by-product), can be reused as a constructed ...
-
(Taylor & Francis, 2009-05)This paper describes (in a summarised manner) a research attempt to integrate the dewatered alum sludge, a residual by-product of drinking water treatment process, into a constructed wetland (CW) system for the purpose of ...
-
(Elsevier, 2009-01)The use of Fenton’s reagent (Fe2+/H2O2) and Fenton-like reagents containing transition metals of Cu(II), Zn(II), Co(II) and Mn(II) for an alum sludge conditioning to improve its dewaterability was investigated in this ...