In this study the use of microwave plasma sintering of nickel oxide (NiOx) particles for use as p-type photoelectrode coatings in dye-sensitized solar cells (DSSCs) is investigated. NiOx was chosen as the photocathode for ...
Photoactive NiO electrodes for cathodic dye-sensitised solar cells (p-DSCs) have been prepared with thicknesses ranging between 0.4 and 3.0 mm by spray-depositing pre-formed NiO nanoparticles on fluorine-doped tin oxide ...
The photoactivity of both un-doped and carbon-doped titanium dioxide (TiO2) coatings has been widely reported. In this paper, the use of a microwave plasma as a novel oxidation treatment for the fabrication of these coatings ...
Crystalline titanium dioxide (TiO2) coatings have been widely used in photo-electrochemical solar cell applications. In this study, TiO2 and carbon-doped TiO2 coatings were deposited onto unheated titanium and silicon wafer ...
The photoactivity of carbon-incorporated titanium dioxide (TiO2) has been widely reported. This study involves a novel approach to the incorporation of carbon into TiO2 through the use of microwave plasma processing. The ...
Dye sensitised solar cells (DSSCs) use a mesoporous TiO2 scaffold, typically assisted by an adsorbed dye, as the main active element, responsible for the photon absorption, exciton generation and charge separation ...
Plasmas containing gadolinium have been proposed as sources for next generation lithography at 6.x nm. To determine the optimum plasma conditions, atomic structure calculations have been performed for Gd11+ to Gd27+ ions ...
We have demonstrated an efficient extreme ultraviolet (EUV) source at 6.7 nm by irradiating Gd targets with 0.8 and 1.06 μm laser pulses of 140 fs to 10 ns duration. Maximum conversion efficiency of 0.4% was observed within ...
Measurements of the total ion emission from a pair of colliding laser-produced aluminium plasmas were obtained with the aid of a Faraday cup detector. The energy profile width at half height of the kinetic energy distribution ...
The collision of two laser generated plasma plumes can result, under appropriate conditions, in the formation of ‘stagnation layer’. The processes underlying this phenomenon are complex and time dependent. The majority of ...