In this study, alum sludge was introduced into co-conditioning and dewatering with an anaerobic digested activated sludge to examine the role of the alum sludge in improving the dewaterbility of the mixed sludge and also ...
In view of the well recognized need of reject water treatment in MWWTP (municipal wastewater treatment plant), this paper outlines two strategies for P removal from reject water using alum sludge, which is produced as ...
Currently, organic polymers are adopted in alum sludge (aluminium-coagulated drinking water treatment sludge) conditioning. However, there are important concerns regarding the use of these polymers because of the unknown ...
Settling behaviour of polymer conditioned water-treatment sludge was investigated in this study for the purpose of a better understanding of a so-called “CML30 method”, which was developed in previous study to evaluate the ...
On the basis of experiments carried out using an image analysis system and static zone settlement, the alum sludge floc structure and the floc packing status with varied polymer dosages were examined in greater detail to ...
Excess phosphorus (P) in wastewaters promotes eutrophication in receiving waterways. A cost-effective method such as use of novel low-cost adsorbents for its adsorptive removal would significantly reduce such impacts. Using ...
Problems concerning the management and utilization of sludge derived from water treatment processes are still not fully solved. A common approach is direct discharge to a landfill site. This study provides experimental ...
The generation of alum sludge from drinking water purification process remains inevitable when aluminium sulphate is used as primary coagulant for raw water coagulation. Sustainable managing such the sludge becomes an ...
Organic polymers have long been used as sludge conditioners to improve its dewaterability in sludge management practice. Although polymers can bring about a great dewatering performance of the sludge, their potential health ...
This research assessed the use of gypsum (CaSO4.2H2O) as a skeleton builder for sludge dewatering since polymer conditioning of sludge affected only the rate of water release, not the extent of dewatering. The use of gypsum ...