Aluminium-based water treatment residual (Al-WTR) is the most widely generated residual from water treatment facilities worldwide. It is regarded as a by-product of no reuse potential and landfilled. This study assessed ...
This paper describes (in a summarised manner) a research attempt to integrate the dewatered alum sludge, a residual by-product of drinking water treatment process, into a constructed wetland (CW) system for the purpose of ...
Alum sludge refers to the by-product from the processing of drinking water in Water Treatment Works. In this study, groups of batch experiments were designed to identify the characteristics of dewatered alum sludge for ...
Drinking-water treatment sludge (DWTS) produced at water treatment plants is an inescapable by-product and has long been treated as a waste for landfill. In this study, a series of batch adsorption tests were conducted ...
Excess phosphorus (P) in wastewaters promotes eutrophication in receiving waterways. A cost-effective method such as use of novel low-cost adsorbents for its adsorptive removal would significantly reduce such impacts. Using ...
The generation of alum sludge from drinking water purification process remains inevitable when aluminium sulphate is used as primary coagulant for raw water coagulation. Sustainable managing such the sludge becomes an ...
Waterworks sludge continues to be an inescapable by-product of the potable water treatment process. Accordingly, final disposal of the sludge remains one of the most significant pressing problems for the potable water ...
This paper is a research brief highlighting the development of a novel alum sludge based constructed wetland system, aimed at reducing the pollution effects of agricultural run-offs. Alum sludge is a by-product of drinking ...
This study assessed the potential reuse of an aluminium coagulated drinking–water treatment sludge (Al–DWTS) as a main substrate in constructed wetland to replace soil for the treatment of P-enriched wastewater. The ...
This research has two eventual goals: (1) To optimize performance of subsurface constructed wetlands for removal of phosphorus (P) (2) To demonstrate that dewatered alum sludge (a by-product), can be reused as a constructed ...
The purpose of this study is to optimize adsorption conditions of powdered alum sludge (PAS) as low-cost adsorbent for the removal of three P-species (ortho-P, poly-P and organic-P) from wastewater using the response surface ...
The adsorption equilibrium of a wide range of phosphorus species by an aluminium-based water treatment sludge (Al-WTS) was examined in this study. Four kinds of adsorption-isotherm models, namely Langmuir, Freundlich, ...
The aluminium content in dewatered aluminium-coagulated water treatment residual (DAC-WTR) can lead to a high phosphorus (P) removal capacity. Therefore, DAC-WTR has been used as adsorbent/soil amendment to remove P in ...
Effective management of the industrial waste requires a sustainable approach that maximizes its value of reuse/recycle for other industrial demands and the environment needs. This paper aims in exploring the potential of ...
In view of the well recognized need of reject water treatment in MWWTP (municipal wastewater treatment plant), this paper outlines two strategies for P removal from reject water using alum sludge, which is produced as ...
In this paper, two laboratory scale simulated reed beds were investigated for the purpose of assessing the feasibility and effectiveness of using dewatered alum sludge as a possible substrate for wastewater treatment reed ...
This study aims to explore a novel application of dewatered alum sludge cakes (DASC) as the main medium in a single model reed bed to treat phosphorus-rich animal farm wastewater under "tidal flow" operation on a long term ...